How To Balance Treble And Bass

Every sound technician at some point in time will be confused as to how to balance treble and bass, and what we want our readers to note is it is completely okay to feel this way. In some cases, you will find music producers and sound production teams set the bass to be higher than the treble, and this will only cause an imbalance in equalization. We are of the opinion that the treble should be higher, and we will explain why in this detailed post.

Adjusting high frequency and low frequency levels is what we also refer to as balancing treble and bass in audio engineering, and achieving this can be done in two ways. It could be done either by making use of an automatic gain circuit or through the use of a manual equalization software.

Treble Vs Bass

Every aspiring music producer or even professionals as the case may be might be faced with so many questions and challenges, and one of such question can be between the bass and treble, which should be higher? What we want you to also note regarding the treble and bass is they have different sound levels, and it is very vital that you figure out which should be higher if you want to create a track, song, or tune that will sound pleasurable to the ears.

Every music producer should already be familiar with the theoretical aspect of music, and they should already be familiar with some notable terms like harmony, pitch, melody, rhythm, texture, and tempo. The fusion of all of these is what is regarded as the foundation of whatever music you are listening to today, but you might be confused as to which of these terms does treble and bass fall under. That is a very good question if you are a newbie.

Treble and bass falls under the pitch category, and a musical genius will make use of the word ‘clef’ in describing a musical note’s pitch. Two musical clef notes will exist when you play the piano, and these refer to the bass and treble notes. Interestingly, these notes are considered as both sides of a coin, but the treble always has a higher sound.

Bass on the other hand is known to have lower sounds, and your mind will already move towards a higher pitch sounding voice when you hear the word treble. This shouldn’t come as a surprise to you but there is still so much for you to learn about these musical notes, and learning about them everyday will also help you get more better at making quality and pleasant music.

Just like we have bass and treble, there is something also called mids. If you have been paying attention to all we have been saying so far in this post, it will be easy for you to tell that mids implies middle frequencies. This means the mids exist at the center of the low and high frequencies or notes, and there are songs that will make you desire listening to every frequency. This ensures that you do not miss out on hearing all of the sounds.

Interesting Read – Midas M32R Review

How To Balance Treble And Bass

How To Balance Treble And Bass

There are several ways a sound specialist can take when trying to balance bass and treble, and analyzing audio tracks through checking of balance and not frequency is one system so many audio technicians have adopted to work with. This step helps in determining if you mix still needs more bass or more treble to be added. Achieving a smooth balance will require the treble to be higher than the bass, and this helps in getting rid of problems like;

  • Low frequency hum
  • Mid range frequency confusion
  • Voice projection

Furthermore, adjusting of speakers can also help in achieving the balance that you seek. Check out steps on balancing bass and treble on a speaker;

  • Right click on the speaker image you can see in your taskbar
  • From the Menu option, select playback devices
  • If you see a ‘speaker menu’ option or amplifier, click on it if you will love to alter the sound setting
  • Take a look at the base boost box and click on enhancement tabs to switch the levels

The following steps are what you need when you want to balance bass and treble on a computer

  • Search for the speaker icon in the notification bar and click on it
  • Click on the mixer link so you can be able to download the mixer
  • You will find a speaker icon on the master volume, click on it
  • Go through the enhancement tab, and click on the bass boost to make the required changes.

These are the necessary steps you will need to take when you want to balance bass and treble sounds on a speaker and on a computer, and you might be wondering why we said the treble should be higher than the bass. This is because setting the treble higher than the bass helps in getting rid of distortion and low bass feedback, making sure that the entire track is well balanced.

Check This Out – Dolby Cinema Vs IMAX

What you have to do is to make sure the bass is increased until all of the distortion sound gets fully eliminated, but make sure you do not place the bass above the treble if you want your mix to have the best sound quality. This is the simple reason behind not placing the bass setting above the treble setting.

Some people might also want to know if the there is any specific difference between the bass and treble. The fact is the frequency level remains the only difference between these two settings, and the lowest musical sounds is what the bass level refers to. The highest frequencies on the other hand is what the treble settings is all about, and now you can see that equalizing or balancing takes more than just playing with the bass and treble levels.

Increasing bass and treble with care is very essential when balancing both if you want to avoid frequency muddiness. Obtaining superior sound quality requires you to position the bass below the treble, and this is something you should never forget. The surest way to enjoying tracks is learning how to balance treble and bass, and we hope you found the steps discussed in this post very useful.